Table of Contents
Advertisement
Appendix A
System Messages
This appendix lists the error and information messages that may be displayed on the terminal
attached to the hub. The messages are listed alphabetically. Each message includes a brief
explanation and suggested action.
Error Messages
Bad route command
Meaning:
You entered a route command with incorrect syntax.
Action:
Follow this syntax for the route command:
route add destination|gateway [metric]
route delete destination|gateway [metric]
route dump
Baud rate must be 1200, 2400, 4800, or 9600
Meaning:
You entered an invalid baud rate for the serial port.
Action:
Enter the set baud command again using one of the valid baud rates.
Change failed with error xx
Meaning:
The change you were attempting to make failed because of the error specified
by xx.
Action:
Take care of error xx first; then attempt to make the change again.
System Messages
A-1
Advertisement
Table of Contents
Need help?
Do you have a question about the 3C780 - LinkBuilder FDDI Base Unit and is the answer not in the manual?
Questions and answers