Table of Contents
Advertisement
While holding the hub in place, insert the four mounting screws supplied
with the hub into the mounting holes in each bracket (two screws per
bracket).
5.
Fasten the brackets to the rails by screwing in the screws.
6.
Tighten each screw.
Figure 2-1. Attaching Mounting Brackets to the Hub
The hub is now installed in the distribution rack, as shown in Figure 2-2.
Installing the Hub
2-3
Advertisement
Table of Contents
Related Manuals for 3Com 3C780 - LinkBuilder FDDI Base Unit
Related Products for 3Com 3C780 - LinkBuilder FDDI Base Unit
- 3Com 3C16751A
- 3Com 3C16430
- 3Com OfficeConnect 3CDSG8
- 3Com 3C16476A - Baseline Switch 2250
- 3Com 3C16755-US - OfficeConnect Dual Speed Hub 5
- 3Com 3C16791B-US - Office Connect Dual Speed Switch 8
- 3Com 3CR17561-91-US - Switch 4500 26PORT Managed 24 10/100 2 Gbe Stackable RJ45
- 3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch
Need help?
Do you have a question about the 3C780 - LinkBuilder FDDI Base Unit and is the answer not in the manual?
Questions and answers