Set Tnotify; Set Treq - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

C-6 Commands
set pwd
Syntax
set pwd
Description
The set pwd command allows you to set and change the password:
Passwords can be one to eight alphanumeric characters and are case sensitive.
Null passwords are allowed.

set tnotify

Syntax
set tnotify val
Description
The set tnotify command sets T-Notify (fddiSMTT-Notify) to the decimal
value specified by val. This value is used in the Neighbor Notification protocol.
T-Notify must be in the range of 2 to 30 seconds. The default is 30 seconds.

set treq

Syntax
set treq val
Description
The set treq command sets the Target Token Rotation Time
(fddiMACT-Req) for the MAC on the primary ring. The time is set to the
decimal value specified by val. The default is 165000 microseconds (165
milliseconds).
You are prompted for the old password.
You are then prompted for a new password.
You are prompted for the new password again.