3Com 3C780 - LinkBuilder FDDI Base Unit User Manual page 175

6 Index
S (continued)
set ler alarm command, 4-9, C-5
set ler cutoff command, 4-10, C-5
set pwd command, 4-5, C-6, C-20
set tnotify command, C-6, C-20
set treq command, C-6, C-21
setup. See installation.
shielded twisted pair. See STP.
show ? command, C-10, C-21
show attach command, 5-1, C-7, C-21
show baud command, C-7, C-21
show boot command, C-7, C-21
show boot load command, 4-14, C-7
show boot method command, 4-14, C-7
show cfm command, 5-13, C-8
show commands, 4-2, C-7
show fstats command, 5-1, C-9
show gateway command, C-9, C-21
show help command, C-10, C-21
show ip command, 4-3, 5-3, C-10, C-21
show log command, 5-21, C-10, C-21
show log last command, 5-21, C-10
show mib counters command, 5-3, C-10
show neigh command, 5-4, C-11
show obs command, C-11, C-22
show ports command, 5-5, C-12
show rev command, C-13, C-22
show ring command, 5-10, C-14
show sid command, 5-4, C-14, C-22
show tmax command, C-14
show tneg command, C-15
show tnotify command, C-15, C-22
show treq command, C-15, C-22
show tvx command, C-15, C-22
Signal Detect LED, 5-17
single attachment hub (SAC), 3-4
SMT
functions, 1-6
maximum token rotation time, 4-11
negotiated time, 4-11
neighbor notification timer, 4-7
target token rotation time, 4-8
valid transmission timer, 4-11
software image, downloading, 4-12
specifications, B-1
station identifier, 5-4
station management parameters (SMT), 4-7
Station Management (SMT), 1-3
MIB, 1-1
remote management, 1-1
STATUS LED, 5-12
STP
cabling rules, 2-20
media port module, 1-14
module cascade connector, 2-11
pin assignments, 2-21
subnet mask, 4-4
system messages, A-1
system software diskette, 2-5
T
T-Max, 4-11
T-Neg, 4-11
T-Notify, 4-7
T-Req, 4-8
Target Token Rotation Time (TTRT), 4-8
technical specifications, B-1
technical support services, D-1
Telnet protocol, 2-16, 2-19
terminal connections, 2-16
TFTP download option, 4-12
TOKEN LED, 5-12, 5-22
tree-mode connection, 5-13
TVX, 4-11
twisted ring, 3-14