Set Baud - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

C-2 Commands
Example
When you enter the set attach command, you are prompted to select an
attachment configuration, as shown below:
Select one of the following:
Attachment port configuration?
The possible selections are defined below:

set baud

Syntax
set baud
Description
The set baud command allows you to set the baud rate for the serial (console)
port.
Examples
When you enter the set baud command, you are prompted to select a baud rate,
as shown below:
Select one of the following:
Baudrate?
1. B/A
2. S/M
3. M/M
B/A Sets ports as B and A for dual attachment or dual homing
S/M Sets ports as S and M for single attachment
M/M Sets ports as M ports for null attachment only
1. 1200
2. 2400
3. 4800
4. 9600