Clear; Diagnostic And Connectivity Commands - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

C-16 Commands
Description
The show tvx command displays the value of the Valid Transmission Timer
(fddiMACTvxValue), which is the maximum time allowed by the MAC on the
primary ring for the receipt of valid frames or tokens.

Diagnostic and Connectivity Commands

arp
Syntax
arp [dump | del | set]
Simplified Syntax
arp dump
arp del host_address
arp set host_address hardware_address
Description
The arp command displays information contained in the Address Resolution
Protocol (ARP) table. It also allows you to change information stored in the
ARP table.

clear

Syntax
clear [log | alarm]
Description
The clear log command clears the fault log, which contains a limited history of
recent faults that have occurred in the system.
arp dump Displays the current contents of the ARP table
arp del Deletes the IP host address
arp set Adds the host IP address and the host 48-bit FDDI address in
noncanonical format to the ARP table