Show Commands
show attach
Syntax
show attach
Description
The show attach command displays the configuration of the attachment ports
(the two leftmost ports) on the module in slot 1.
The configuration is not restricted regardless of the slot 1 module type. If the
module type physically creates an illegal connection, a warning is displayed.
The possible attachment port configurations are:
B/A
B and A for dual attachment or dual homing
S/M
S and M for single attachment
M/M
M ports for null attachment only
show baud
Syntax
show baud
Description
The show baud command displays the baud rate for the serial port.
show boot
Syntax
show boot [method | load]
Description
The show boot method command displays the boot parameters (method, image
filename, and IP address of the boot server). The show boot load command
displays the status of the last download.
Commands
C-7