Fault Log Error Code Messages - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

A-6 System Messages
TFTP Abort - invalid NVRAM parameters.
Meaning: The TFTP download request could not be completed because the requested IP
address, server IP address, or image filename was incorrect. The existing image
will not be changed.
Action: Make sure that you have entered the correct the IP addresses or image filename.
Then reissue the download request.
TFTP Attempt using NVRAM parameters.
Meaning: The TFTP download request was interrupted. The existing image will not be
changed.
Action: Check to be sure the TFTP server is operating properly, and reissue the
download request.
TFTP download completed successfully.
Meaning: The software image has been downloaded successfully.
Action: Proceed with normal hub operations.

Fault Log Error Code Messages

The x's in each designation represent any hexadecimal digit.
00xxxxxx
Meaning: Nonvolatile RAM error on the management module.
Action: Check LOW BATT LED. If the battery is low, replace it and try the operation
again. If the problem persists, contact 3Com support.