3Com 3C780 - LinkBuilder FDDI Base Unit User Manual page 131

01xxxxxx
Meaning: Flash memory error on the management module.
ontact 3Com support.
Action: C
0xxxxxxx
Meaning: Management module failure.
Action: Replace the module.
1pxxxxxx
Meaning: Media module failure in slot 1.
Action: If p is 0 or a value greater than the maximum number of ports on this module,
replace this module.
If p is a value between 1 and the maximum number of ports on the module, an
error exists on the port number indicated by p. Do not use this port. 3Com
recommends replacing the entire module.
2pxxxxxx
Meaning: Media module failure in slot 2.
Action: If p is 0 or a value greater than the maximum number of ports on this module,
replace this module.
If p is a value between 1 and the maximum number of ports on the module, an
error exists on the port number indicated by p. Do not use this port. 3Com
recommends replacing the entire module.
System Messages
A-7