Resetting And Disabling Snmp; Checking Basic Connectivity; Ping - 3Com 9000 SX User Manual

3-12 C 3: A
HAPTER CCESSING
Resetting and
Disabling SNMP
Table 3-5 SNMP Reset and Disable Commands
Command
disable snmp access
disable snmp trap
unconfig management
Checking Basic
Connectivity

Ping

T S
HE WITCH
Authorized SNMP station list
SNMP trap receiver list
Logon statistics
To reset or disable SNMP settings, use the commands in Table 3-5.
The Switch 9000 has the following two facilities for checking basic
connectivity:
ping
traceroute
The ping command allows you to send Internet Control Message
Protocol (ICMP) echo messages to a remote IP device. The ping
command is available for both the user and administrator privilege
level.
The ping command syntax is as follows:
ping {continuous} {size <n>} <ip_address>
Description
Allows you to disable SNMP on the Switch.
Allows you to prevent SNMP traps from being sent from
the Switch.
Restores default values to all SNMP-related entries.