3Com 3C780 - LinkBuilder FDDI Base Unit User Manual page 100

3. Set the TFTP server's IP address. Type:
set boot server [Enter]
This prompt appears:
Enter server IP address in dot notation?
4. Type the server's IP address. For example, type:
123.44.55.66 [Enter]
This confirmation appears:
Boot parameters
Method
Server
Filename
5. Set the image filename to be used. Type:
set boot filename
The file name prompt appears:
Enter filename?
6. Type the name of the image file after the question mark. For example,
type:
newimage [Enter]
This display appears, showing your entries:
Boot parameters
Method : LOCAL
Server : 123.44.55.66
Filename : newimage
Optionally, if connection to the TFTP server is through a gateway, you
must enter the gateway address.
: TFTP
: 123.44.55.66
:
Setting Up the Hub
4-13