Show Cfm - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

C-8 Commands
The boot method can be one of the following:
The show boot load command displays the parameters used and the status of the
last download to the flash EPROM.

show cfm

Syntax
show cfm
Description
The show cfm command displays the Configuration Management (CFM) state
(fddiSMTCF-State) of the dual ring inside the hub.
Values
CFM states are listed below:
LOCAL Runs flash EPROM (default)
TFTP Uses the TFTP protocol and local configuration
parameters to load a new image across the network
Wrap_A
Wrap_B
Wrap_S
C_Wrap_A
C_Wrap_B
C_Wrap_S
Isolated
Thru