Table of Contents
Advertisement
MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6
Managing the System
Changing Calling Restrictions
Programming Instructions
Console Procedure
PC Procedure
Changing Calling Restrictions
Use this procedure to change individual extensions' calling restrictions to one of
the following:
Unrestricted
Restricted from making all outgoing calls
Restricted from making toll calls
In Release 3.1 and later systems, checking for calling restrictions is reset after
entered star codes pass those restrictions (in some areas, star codes are
provided by the central office to allow the use of special features available from
the local telephone company). In earlier releases, the star code digits were
processed as dialed digits by ARS, Allowed Lists, Disallowed Lists, and calling
restrictions. Therefore, the actual called party number was not properly processed
when a star code was entered. For more information about star codes, see
"Revising Allowed Lists" on page
Planning Guidelines
Changing calling restrictions may affect other features, including Allowed Lists,
Auto Dial, Automatic Route Selection (ARS), Callback, Conference, Coverage,
Disallowed Lists, Display, Extension Status, Forward and Follow Me, Night
Service, personal lines, Pools, Speed Dial, and SA/ICOM buttons. For more
information, see the Feature Reference .
NOTES:
1. You can copy restrictions from another extension as described in
2. In Release 3.1 and later systems, ports programmed for voice
È Æ
no.
Ç Ç
"Copy Call Restrictions" in the "Optional Telephone Features" section
of Chapter 3 in System Programming .
messaging systems (VMI ports) are factory-set as outward-restricted.
To permit outcalling from a voice messaging system, you must change
this restriction.
6
More
More
Type ext. no.
6
6–71.
6
Issue 1
February 1998
Page 6-48
Dial ext.
Å È
Advertisement
Table of Contents
