Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 286

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System
Changing Coverage Delay Options
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for "Coverage Delays" in
the "Telephones" section of System Programming , Chapter 3, or the
summary programming instructions below.
o
When you have finished, file the forms with the rest of the planning forms.
Programming Instructions
Console Procedures
PC Procedures
Change the number of rings before a call is sent to
Group Coverage receivers:
More
Dial sender's ext. no.
Dial no. of rings (1–9)
Change the delay for Primary Cover buttons
programmed for Delay Ring; change the additional delay
before a call is sent to Group Coverage receivers when
Primary or Secondary Coverage Receivers are
available:
More
Dial sender's ext. no.
rings (1–6)
Change the delay for Secondary Cover buttons
programmed for Delay Ring:
More
Dial sender's ext. no.
Dial no. of rings (1–6)
Change the number of rings before a call is sent to
È   Ä Å
Group Coverage receivers:

no. Type no. of rings (1–9)
Change the delay for Primary Cover buttons
programmed for Delay Ring; change the additional delay
before a call is sent to Group Coverage receivers when
Primary or Secondary Coverage Receivers are
È   Ä Ã
available:

no. Type no. of rings (1–6)
Change the delay for Secondary Cover buttons
È   Ä Ä
programmed for Delay Ring:

no. Type no. of rings (1–6)
6
More
More
More
 Ç
Type sender's ext.
 Ç
Type sender's ext.
 Ç
Type sender's ext.
Issue 1
February 1998
Page 6-56
Dial no. of