Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 302

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System
Revising Allowed Lists
code are checked normally by Allowed/Disallowed Lists, calling restrictions, and
ARS.
The MERLIN LEGEND Communications System Release 3.1 and later observes
these Bellcore standards for star codes:
Only 2- or 3-digit star codes are recognized. Two-digit star codes must
begin with 1, 4, 5, 6, 7, 8 or 9. Three-digit star codes must begin with a 2 or
a 3.
The star code or codes must come at the beginning of the string of digits
dialed, not at the end or in the middle.
Multiple leading star codes are allowed. For example, *67*705551212 is
recognized correctly, but in 5551212*67*705553131 the stars are ignored.
Valid Entries
6 digits for each number (an area code plus an exchange, or 6 digits with a
leading 1, where required)
Asterisk (*, Release 3.1 and later systems only) preceding a maximum of one
leading star code per entry
10 numbers for each list (numbered 0 through 9)
8 lists for each system (numbered 0 through 7)
8 lists for each telephone
NOTE:
If you program
to the extension is removed for calls that can be placed by a toll operator.
Also, special characters (such as Pause) are not permitted in Allowed List
entries.
Task List: Revising Allowed Lists
o
Obtain Form 6e, Allowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
o
If necessary, read "Allowed/Disallowed Lists" in the Feature Reference for
detailed information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on the form(s).
o
Open the System Programming menu from the console or a PC with SPM.

as the first digit of a list entry, any toll restriction assigned
6
Issue 1
February 1998
Page 6-72