Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 335

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
7 Learning More
Guides
User and Operator Guides
Most of the user and operator guides share a common format and are intended for
standalone use with a certain telephone or operator console. In other words, an
operator who has an MLX Direct-Line Console (DLC) requires only the operator
guide for that console and does not need to refer to the user's guide as well.
The following is a list of all the user and operator guides for the system:
MLX-5D, MLX-10D, MLX-10DP, MLX-16DP, MLX-20L, and MLX-28D
Display Telephones User's Guide (comes with MLX display telephones)
MLX-5 and MLX-10 Nondisplay Telephone User's Guide (comes with
MLX-10 and MLX-5 nondisplay telephones)
Analog Multiline Telephones User's Guide (for analog multiline telephones:
BIS-10, BIS-10D, BIS-22, BIS-22D, BIS-34D)
MDC 9000 and MDW 9000 Telephones User's Guide (for MDC 9000 and
MDW 9000)
Single-Line Telephones User's Guide (for 8101 and 2500 YMGL
telephones, as well as older single-line telephones)
MLX Direct-Line Consoles Operator's Guide (for MLX DLC operator
consoles)
Analog Direct-Line Consoles Operator's Guide (for analog DLC operator
consoles)
MLX Queued Call Consoles Operator's Guide (for QCC operator consoles)
Calling Supervisor's Guide (ordered according to system needs)
Data/Video Reference (different format from other user guides, includes
information for system managers as well)
Common Elements
With the exceptions of the Calling Supervisor's Guide and the Data/Video
Reference , described on
standard components and organizational aids:
On the front cover, a descriptive table of contents for rapidly locating
needed information
A diagram of the telephone buttons and display (if applicable), explaining
what each does
A description of the line buttons (SA, ICOM, Pool, and buttons labeled with
a telephone number) a person may find on his or her telephone. For
operators, descriptions of DSS buttons are also included. For QCC
operators, factory-set feature buttons are described.
7
7
page 7-13, the user and operator guides include some
Issue 1
February 1998
Page 7-11