Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 277

Communications system
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6
Managing the System
Assigning a HotLine Extension
opportunity to program the necessary Personal Speed Dial code while at the
telephone. For security reasons, as long as the extension remains a HotLine, no
further programming is allowed at the extension, and changes to the speed dial
code must be made using centralized telephone programming.
Because HotLine extensions generally should not receive calls, consider
programming the single-line telephone for No Ring.
A single-line telephone without a dialpad can be used for many HotLine
applications. If the telephone has a dialpad, it allows dialing of digits after a call is
connected, in response to an automated attendant's prompts, for example.
Task List: Assigning a HotLine Extension
o
Assemble any required system planning forms, for example, System Form
4f, Tip/Ring Equipment.
o
Open the System Programming menu from the console or a PC with SPM.
o
If necessary, assign a personal line to the extension, following the
instructions in "Assign Trunks or Pools to Telephones" in the "Telephones"
section of System Programming , Chapter 3.
o
If necessary, assign or delete intercom or System Access buttons by
following the instructions in "Assign Intercom or System Access Buttons" in
the "Telephones" section of System Programming , Chapter 3.
o
Program Personal Speed Dial code 01 with the inside or outside number
required, including any ARS or other access codes as necessary. You can
use extension programming to program the code at the single-line
telephone, or you can program the number using centralized telephone
programming (see
o
If necessary, program the line at the extension for No Ring (see
"Centralized Telephone Programming" on page
o
If Night Service with Outward Restriction is in use on your system, you may
need either to add the HotLine extension to the Night Service Exclusion
List or add the number dialed by a HotLine to a Night Service Emergency
List.
o
When you have finished, file the form(s) with the rest of the planning forms.
NOTE:
This task requires an idle condition: Extension Forced Idle.
"Centralized Telephone Programming" on page
6
6–24).
Issue 1
February 1998
Page 6-47
6–24).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merlin legend 6.0

Table of Contents