Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 253

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System
Programming from a PC with SPM
To access SPM through a local or remote modem connection, follow the steps
below. For more information about the procedure format, see
Programming Procedures" on page
Console/Display Instructions
Set up the appropriate physical connections between the PC and the control
! 
unit as described in Chapter 2 of System Programming.
Type „x and press
! 
Press any key to display a blank screen on which you can enter modem
! 
commands. (You may have to press the key several times.)
Make a data connection to the modem of the control unit.
! 
See Chapter 2, "Programming with SPM," in System Programming . When the
connection is made, the password prompt appears, as shown in Step 5.
Type the remote access password to display the SPM Main Menu shown in
! 
Step 2.
The password does not display when you type it.
6–3.
Additional Information
to display the SPM Welcome screen shown below.
YYY = current version of SPM
Issue 1
February 1998
Page 6-23
"Using the