Power Supply Module - Lucent Technologies MERLIN LEGEND 6 System Manager's Manual

Communications system
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
3
System Components
Control Unit
Translation Memory Card. White label; entitled Translation Card . To back
up and restore your system programming as an alternative to using System
Programming and Maintenance (SPM). These procedures are faster when
you use the PCMCIA card.

Power Supply Module

The power supply module
telephone, and to most adjuncts (some adjuncts, such as fax machines, come
with their own power supplies and do not rely on the system). Each carrier
requires its own power supply module, installed in the carrier's leftmost slot. The
current power supply module is XXX; it works with all releases of the system.
In some systems, you need extra power supplies to support your system
components as described in
Figure 3–2.
(Figure
3–2) provides power to the carrier, to each
"Power-Related Hardware" on page
TEST PORTS
POWER
+5V
1
2
-5V
3
-48V
BATTERY BACK UP
ON/OFF
CAUTION
TURN OFF SWITCH THEN REMOVE
POWER CORD BEFORE INSERTING OR
REMOVING UNIT.
ATTENTION
ETEIGNEZ L'APPAREIL ET D´EBRANCHEZ
LA PRISE AVANT D'INTRODUIRE OU DE
RETIRER DES MODULES.
PRECAUCION
APAGUE EL INTERRUPTOR DESPUES
REMUEVA EL CABLE ELECTRICO
AC INPUT
INSERTANDO O REMOVIENDO LA
UNIDAD
VORSICHT
ZUERST ABSCHALTEN, DANN DAS
STROMKABEL ENTFERNEN, EHE DAS
GERAT EINGESETZT ODER ENTFERNT
WIRD.
Power Supply Module
3
Power Indicator (Green Light)
On/Off Switch
Power Connection
Grounding Screw
Issue 1
February 1998
Page 3-4
3–46.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merlin legend 6.0

Table of Contents