Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 263

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System
Centralized Telephone Programming
Console/Display Instructions
Specify the number of the extension to which you want to copy programmed
! 
features or SA or ICOM buttons.
8‚ƒ’Ãr‘‡r†v‚ÃYYYYÇ‚)
OOOO
Either continue to copy line assignments and programmed features from the
! 
copy extension shown to another extension or go to Step 7.
Return to the Centralized Programming menu.
! 
([LW
Select .
Save your entry.
! 
(QWHU
Select .
Return to the Centralized Programming menu.
! 
([LW
Select .
Copying Line/Trunk Button Assignments
Use this procedure to copy outside line/trunk button assignments, pool dial-out
code restrictions (Hybrid/PBX only), and Night Service information (for operator
positions only). You can copy from one extension to another or to a block of
extensions with identical requirements. Use system programming for this
procedure.
Additional Information
YYYY = extension entered in Step
Dial or type [ OOOO ].
(QWHU
Select ( ) to continue copying
line assignments from the extension
currently displayed on Line 1 to additional

extensions.
Select ( ) if the extension

numbers to be copied to are sequential.
Select ( ) after completing
programming.
Return to Step 4 to continue
programming. The extension to be copied
from is displayed on Line 1.
6
Issue 1
February 1998
Page 6-33
PC
2
Ã
Ç

Ç