Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 283

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System
Changing Coverage Delay Options
Table 6–8. Continued
Timer
Secondary Cover
Ring Delay
Secondary
Coverage
Delay Interval
Retry Timing
Interval
A sender can also be part of a Coverage group whose calls are covered by
individuals, operators, or a calling group (an option is often used to provide voice
messaging system coverage).
calls are handled when Group and Individual Coverage are combined.
Factory
Setting Range
2 rings 1–6 rings
2 rings Fixed
5 sec Fixed
Description
Release 4.1 and later systems, programmable for
each extension. In addition to the fixed Secondary
Coverage Delay Interval (2 rings), this timer sets the
delay before a Secondary Cover button programmed
for Delay Ring begins to ring audibly. This setting
does not affect Primary or Group Coverage call
delivery.
Delay before sending Individual Coverage calls to a
Secondary Cover button programmed for Immediate
Ring, when sender also has Individual Coverage to a
Primary Cover button.
In Release 4.1 and later systems, the delay (in
addition to the Secondary Cover Ring Delay setting
for the sender) before a Secondary Cover button
programmed for Delay Ring begins to ring audibly.
Repetition interval for trying to send calls to group
coverage when no receivers are available; continues
until call is answered by sender or receiver (or caller
hangs up).
Table 6–9 summarizes the ways that coverage
Issue 1
February 1998
Page 6-53