Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 157

Table 4–7. Continued
System Manager's Functions and Features
Group activities (continued)
Set up as many as 10 primary delay
announcement devices and 1 secondary
device (Release 5.0 and later systems only) to
play recorded messages to waiting callers
when group members are unavailable.
Set up a voice messaging system to take calls.
Lines, line buttons, fixed-feature buttons
Change, add, or delete the line buttons (SA or
ICOM) available on a user's telephone.
Remove one of two assigned line buttons (SA
or ICOM) so that Transfer cannot be used.
Also disables Conference, Call Waiting, Park,
group Pickup, and Privacy.
Assign a line to a Night Service group so that it
rings immediately when Night Service is
activated.
Specify the line selected when a user lifts the
handset or presses the Speaker button.
Take an outside line out of service.
Copy line assignments, buttons, and features
from one extension to another.
Type PROG Considerations
General SYS
Group SYS
User SYS For single-line only in
Release 4.0 and later
User SYS Single-line phones,
Release 4.0 and later.
Intended primarily for
hotels and motels.
User SYS Release 4.1 and later
only; line does not have
to appear at any
operator position.
User SYS
Sys Mgr SYS
See System
User CNT
Programming.
Feature Name
Group Calling
Group Calling
System Access/Intercom Buttons
System Access/Intercom Buttons
Night Service
Automatic Line Selection and
Ringing/Idle Line Preference
Automatic Maintenance Busy
Continued on next page