Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 252

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System
Programming from a PC with SPM
With a Local or Remote Modem Connection
The method you use to access SPM by modem depends on whether you are
programming on site (locally) or from a remote location.
If you are on site, the modem must be connected to a 012 or a 016
(Release 4.0 and later only) module on the control unit. To establish a
connection to the control unit's internal modem, dial   .
If you are at a remote location, do one of the following:
— Place a call to the system on a remote access line, enter the barrier
— Place a voice call to the system on a regular line and ask the operator to
Modem Connections
You must make a data connection to a modem. The following modem dialing
commands work for most modems. These may not be the commands your
modem uses; refer to the user guide that came with your modem for specific
information.
If the PC is in the same location as the control unit, type   .
If the PC is in a remote location and your system has activated the Remote
Access feature, type the following:
6U9U , the remote access telephone number, and X  .
Then press
For example: 6U9U ! $$$ !"#ÃX 
digits) may be required between the
example: Ã6U9U ! $$$ !"#ÃX !"#$%&ÃX  .
When the connection is made, the password prompt appears on the
screen. (You may have to press
password prompt.)
If you enter a telephone number of fewer than 11 digits, you must end it
with a pound sign (#).
If the PC is in a remote location and your system has not activated the
Remote Access feature, do the following:
1.
2.
3.
code (if required), and dial the code for the internal modem (   ).
transfer you to the modem (by dialing
answer tone, switch to data mode.
NOTE:
Use the main telephone number to place a voice call to the system.
Instruct the operator to transfer the call to the modem by transferring
the call to   .
Put the modem on line by switching it to data mode.
6
Ã
  ). When you hear the modem
. Also, a barrier code (4 to 11
6U9U
and the X  entries. For
more than once to get the
Issue 1
February 1998
Page 6-22
6