Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 251

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System
Programming from a PC with SPM
Console/Display Instructions
If the PC does not have a hard disk, insert the SPM diskette into Drive A.
! 
Ã
B
Type and press
! 
6)3 appears on the screen.
TQN
Type and press
! 
Press any key to display the SPM Main Menu shown below.
! 
If the SPM Main Menu does not appear or if the information about the
screen is garbled, press any key again.
If the COMM PORT (communications port) screen appears instead of the
SPM Main Menu, the SPM software has not been initialized. See Chapter 2
of System Programming.
To reach the System Programming menu, select T’†ÃQ…‚t…h€Ã by pressing
! 
Perform the procedures in the task descriptions as outlined in this chapter.
! 
Additional Information
.
to display the SPM Welcome screen shown below.
YYY = current version of SPM
NOTE:
The function keys shown on either side of the display are included
here for quick reference. On the PC screen, the system
programming keys do not look like actual keys.
Issue 1
February 1998
Page 6-21
.