Table of Contents
Advertisement
MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6
Managing the System
Changing Group Coverage Assignments
Task List: Assigning
Disallowed Lists to Extensions
o
Obtain Form 6f, Disallowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
o
If necessary, read "Allowed/Disallowed Lists" in the Feature Reference for
detailed information about this feature.
o
Plan changes using the planning guidelines above; record the new values
on the form(s).
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the instructions for "Assign Disallowed
Lists to Telephones" in the "System Features" section of System
Programming , Chapter 3, or the summary programming instructions below.
o
When you have finished, file the form(s) with the rest of the planning forms.
!
Programming Instructions
Console Procedure
PC Procedure
Changing Group
Coverage Assignments
Use this procedure to assign or remove an extension from a coverage group.
NOTE:
In Release 4.1 and later systems, you can change, on an extension-by-
extension basis, the number of rings at a sender's extension before a call is
sent to Group Coverage receivers. For programming information, see
Chapter 3, "Common Administrative Procedures," in System Programming
and
SECURITYlALERT:
In Release 3.1 and later systems, Disallowed List number 7 is
automatically assigned to voice messaging system ports. To help
guard against toll fraud, assign this list to other extensions. For more
information, see the section above, "Changing Disallowed Lists."
Æ
no.
Ç Ç
"Changing Coverage Delay Options" on page 6–51
6
6
Dial list no.
Type list no.
6
Issue 1
February 1998
Page 6-77
Dial ext.
Type ext. no.
.
Advertisement
Table of Contents
