Lucent Technologies MERLIN LEGEND 6 System Manager's Manual page 298

MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6 Managing the System
Connecting Auxiliary Equipment
Valid Entries
Line/trunk numbers
For Voice Messaging System and Automated Attendant
The number of rings cannot be programmed for individual voice messaging
systems; the single setting applies for all. Use the Group Type procedure in
"Optional Group Features" (Chapter 3, System Programming ) to assign VMI ports
as either integrated or generic.
Valid Entries
Touch-tone duration: 50 to 200 ms, in increments of 25 ms
Interval between digits: 50 to 200 ms, in increments of 25 ms
Number of rings before transfer: 0 to 9
Task List: Connecting Auxiliary Equipment
o
Obtain Form 2c, System Numbering: Line/Trunk Jacks, and the appropriate
individual telephone form (4d, 4e, 4f, 5b, or 5c). For a voice messaging
system or auto attendant system, see the forms packaged with the
application.
o
If necessary, read "Auxiliary Equipment" in System Programming , Chapter
4, for additional information.
o
Plan changes using the planning guidelines above; record the new values
on the form(s).
o
Open the System Programming menu from the console or a PC with SPM.
o
Program the change(s), following the appropriate instructions for "Auxiliary
Equipment" in System Programming , Chapter 4, or the appropriate
summary programming instructions below.
o
When you have finished, file the form(s) with the rest of the planning forms.
NOTE:
For Music On Hold and maintenance alarms, System Idle is
required; for loudspeaker paging, Line/Trunk Idle is required.
6
Issue 1
February 1998
Page 6-68