Table of Contents
Advertisement
MERLIN LEGEND Communications System Release 6.0
System Manager's Guide 555-660-118
6
Managing the System
Managing the System
This chapter helps you complete the most common system management tasks. It
includes some background on the types of programming and how to access them,
and then provides task descriptions and procedures.
!
CAUTION:
Do not attempt to change either the system numbering plan or the system
operating mode. Changing either of these could cause serious disruption of
the system and would require significant time and effort to remedy. Also, do
not use either the
programming menus except when instructed to do so by a Lucent
Technologies representative or when performing the CTI link procedures
described in
Before you perform the system management tasks, review the general
instructions in the next sections, "Using the Task Descriptions" and
Programming Procedures" on page
To help troubleshoot system problems, label phones with extension numbers
rather than line numbers.
NOTE:
Release 6.0 and later systems (Hybrid/PBX mode only) support private
connections between MERLIN LEGEND Communications Systems and
DEFINITY Enterprise Communications Server (ECS) or DEFINITY
ProLogix Solutions systems using private networks or the public switched
telephone network. This aspect of the system is not covered in this guide.
For complete information, see the Network Reference.
or
"Busying-Out and Restoring the MLX Module" on page
6–3.
6
options from the system
Issue 1
February 1998
Page 6-1
6
6–91.
"Using the
Advertisement
Table of Contents
