Printing A Transmission Report - Xerox WorkCentre M24 Reference Manual

10.2 Printing Reports and Lists
10.2.3
Use the following procedure to print a Transmission Report when a transmission
is completed normally.
G
10
G
G
Procedure
1
Display the Fax screen.
2
Select Transmission Report in the Send Options screen.
The Transmission Report screen is displayed.
208

Printing a Transmission Report

When a transmission does not end normally and a Transmission Report is set to On, a "Fail to
send: Pass this report to the sender." message is printed.
The Transmission Report cannot be printed even when it is set to On using the Internet Fax (iFAX)
function and the Fax gateway function is used. For details on the fax gateway function, see "13.4.2
Sending Faxes to Recipients as Relay Centers" (P. 284).
For details on Transmission Report, see "10.8 Transmission Report" (P. 217).
Enter recipient's Fax No.
[ Fax No. ]
Basic Features Scan Options Send Options
Resolution
Address Book Standard
Fine
Super-fine (400dpi)
Keyboard
A B C
Super-fine (600dpi)
Enter recipient's Fax No.
[ Fax No. ]
Basic Features Scan Options Send Options
Communication Mode Priority Send/
G3 Auto Delayed Start
Priority Send : Off
Delayed Start : Off
Cover Note Recipient Print Sets
Off 1 Set(s)
Memory :100%
Next
Recipient
On-Hook/
Menu
Others
Original Type Lighter/Darker
Text
Text & Photo
Photo
Memory :100%
Next
Recipient
On-Hook/
Menu
Others
Send Header
On
Transmission Report
Off