Configuring The Triton Voip Board - Altigen AltiContact Manager Version 5.0 Administration Manual

The Board Configuration window contains the following attributes:
Parameter
Board Info Group
Channel Mapping
List Group
Span Info
Board Configuration
Reset Board

Configuring the Triton VoIP Board

Important: It is strongly recommended that system administrators review
the "Network Configuration Guidelines for VoIP" on page 9-9
before setting up VoIP features.
Description
Board Logical ID: assigned by AltiContact
Manager.
Board Name: the type of board installed in the
system and board ID.
Note: This is informational only and cannot be
edited.
Shows the board Logical Channel, Physical Span,
and Physical Channel.
To reinitialize channels, select the channel to reset
and click the Reset Channel button, then click OK.
Note: This is informational only and cannot be
edited.
Note: Double clicking a channel in this window
invokes a channel configuration window. See
"Triton Analog Trunk Properties" on page 7-
9.
Not available for Triton Analog Trunk LS/GS and
LS boards.
Displays the board's serial number.
Resets the board, after you confirm resetting by
accepting a warning.
Important:
Resetting a board will disconnect all
calls in progress on that board! Be sure
to inform all users before resetting a
board.
AltiContact Manager Administration Manual
Board Configuration
6-7