Voip Setup; Voice Over Ip For Altiware Oe; Triton Voip Board - Altigen AltiWare OE Release 4.0 Getting Started Manual

VoIP Setup

If you want to include Voice over IP in your initial configuration, the
information in this chapter provides the information you need:
• Voice over IP option for OE
• the Triton VoIP board
• Configuration guidelines
• Initial setup
• Troubleshooting
For information on how to configure the Triton VoIP board and trunks,
please refer to Board Configuration and Trunk Configuration chapters of
the System Administration Manual.

Voice over IP for AltiWare OE

AltiWare OE includes the option for Voice over IP (VoIP) functionality,
which in previous releases required the installation of AltiWare IP
software.
VoIP for AltiWare OE runs on an H.323 platform that allows voice calls to
be made through an IP network. It includes an integrated VoIP gateway to
convert voice calls into IP packets and transmit them through the IP
network. It also has the capability of networking multiple AltiServs into a
virtual PBX network. This enables calls to be made through the IP network
which allows for significant savings in toll charges.

Triton VoIP Board

The Triton VoIP board is used to provide voice processing resources for
AltiWare OE, similar to the way Quantum telephony boards are used for
analog trunks and extension lines. Unlike the Quantum telephony boards,
however, only IP trunks are provided on the Triton VoIP board. AltiWare
VoIP uses DSP engines residing on the Triton VoIP board to perform the
voice processing functions needed for H.323 devices. Quantum and Triton
boards are connected via MVIP connectors.
Voice over IP for AltiWare OE
AltiWare OE 4.0 Getting Started Manual 47
C 6
H A P T E R