Installing The Controller Management Software On Netware - HP D7171A - NetServer - LPr Installation Manual

Hewlett-Packard NetRAID-4M Controller Installation Guide
can manage a NetWare controller remotely with FAST, if you have
FAST installed on an NT system, and establish a network connection
between the two systems.

Installing the Controller Management Software on NetWare

Follow these steps to install the Controller Management Software
for Novell NetWare 4.20 or 5.1:
Note:
Ensure that the NetWare server is down and that you
are at the DOS prompt before beginning this installation.
1
When your NetWare server is at the DOS prompt, insert
Diskette #1.
2
You can either execute the program directly from the floppy, or
copy the nwapp_d1.exe executable to a local directory and
execute it from there.
a
To copy the file from the floppy disk to a local directory,
type the following command:
copy a:\nwapp_d1.exe c:\[pathname]
where pathname is a directory on a local DOS partition.
Caution:
!
nwserver
uncompressed, you may overwrite files that should
not be overwritten.
b
Type cd \[pathname] and press Enter.
3
Type nwapp_d1.exe and press Enter.
Answer Yes to uncompress the files.
4
Start the NetWare server.
5
At the NetWare console, type the following and press Enter:
load \[pathname]\hpnsetup
where pathname is the directory where you extracted the files.
5-4
Do not copy nwapp_d1.exe file to the
directory, since when the file is