Installing The Disk Array Management Software; Operating System Support; Ipr Program - HP Surestore Disk Array 12h - And FC60 System Administrator Manual

Managing the HP SureStore E Disk Array 12H on HP-UX

Installing the Disk Array Management Software

Installing the Disk Array Management Software
The AutoRAID Manager (ARM) disk array management software is distributed on the IPR (Independent
Product Release) CD-ROM (B6191AA). The IPR CD-ROM should have been ordered and delivered with
your disk array.
The IPR CD-ROM includes an instruction sheet for installing the software. Follow the instructions to install
the ARM software.
NOTE! The HP SureStore E Disk Array 12H disk array requires IPR CD-ROM release
IPR9810 or later. Earlier releases of the IPR CD-ROM do not contain the required
software.
At the time of printing the following ARMServer patches were available:
PHCO_15699 for HP-UX 10.X
PHCO_15700 for HP-UX 11.0
The latest patches are available from the HP Patch web site:
(www.hp.com/go/support)
which will indicate if the above patches have been superceded.

Operating System Support

The HP SureStore E Disk Array 12H is currently supported on the following HP-UX releases:
10.01
10.10
10.20
11.0

IPR Program

To provide you with the latest software patches and drivers, Hewlett-Packard offers the Independent
Product Release (IPR) program. As a subscriber to this program you will receive a complete collection of
all updated patches and drivers at regular intervals, thus ensuring you always have the latest software. Using
the latest software upgrades will ensure optimal performance of the disk array and other hardware
peripherals.
Contact your Hewlett-Packard sales representative for more details on subscribing to the IPR program.
16