Using The Bios Scsiselect And Disk Utilities - HP D7171A - NetServer - LPr Installation Manual

Using the BIOS SCSISelect
and Disk Utilities
The SCSISelect Utility allows you to change SCSI device and
controller settings without opening the server chassis or handling
the card. The Disk Utilities allow you to low-level format or verify
the disk media of your SCSI hard disk drives.
The SCSISelect settings are listed in Table A-1.
Table A-1. SCSISelect Options
Controller Configuration Options
1
Drives Write Cache
Runtime BIOS
Automatic Rebuild
Container Background Consistency check
NVRAM State
SCSI Channel Interface Options
Controller SCSI Channel ID
SCSI Parity Checking
Controller SCSI Channel Termination
Clustering
SCSI Device Configuration Options
Domain Validation
A
Default
Disabled
Enabled
Enabled
Enabled
Dirty/Clean
Default
7
Enabled
Auto Mode
Disabled
Default
Enabled
A-1