HP D7171A - NetServer - LPr Installation Manual page 2

Copyright
© Copyright 2001, Hewlett-Packard Company.
This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be photocopied, reproduced, or
translated to another language without the prior written consent of Hewlett-Packard
Company.
Hewlett-Packard Company
Network Server Division
10955 Tantau Avenue
Cupertino, CA 95014 USA
Trademarks
SCSISelect and FAST are trademarks of Adaptec, Inc. which may be registered in
some jurisdictions. Windows, Windows 95, Windows 98, and Windows 2000 are reg-
istered trademarks, and Windows NT is a trademark of Microsoft Corporation in the
U.S. and other countries used under license. All other trademarks are owned by their
respective owners.
Changes
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of merchantability and fitness
for a particular purpose. Hewlett-Packard shall not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this material.
Hewlett-Packard assumes no responsibility for the use or reliability of its software on
equipment that is not furnished by Hewlett-Packard.
Technical Support and Services
If you have questions about installing or using this product, check this guide first—you will
find answers to most of your questions here. If you need further assistance, please contact your
server manufacturer.
This Installation Guide is for the person who installs, administers, and troubleshoots LAN
servers. Hewlett-Packard Company assumes you are qualified in the servicing of computer
equipment and trained in recognizing hazards in products with hazardous energy levels.
Disclaimer
IF THIS PRODUCT DIRECTS YOU TO COPY MATERIALS, YOU MUST HAVE
PERMISSION FROM THE COPYRIGHT OWNER OF THE MATERIALS TO AVOID
VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER
REMEDIES.
FCC Compliance Statement
WARNING: Changes or modifications to this unit not expressly approved by the party responsi-
ble for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
ii