HP D7171A - NetServer - LPr Installation Manual page 67

Note: On a NetWare 5.1 system, when the server
comes up, go to the Novell icon, select Exit GUI, and
confirm your choice. This will take you to the NetWare
console.
6
From the HPNSETUP Installation menu, select Start
Installation.
7
Follow the instructions that appear on the screen to complete
the installation (Press F1 for help).
8
After the installation of the Controller Management Software
is complete, you are prompted to update the AUTOEXEC.NCF
file. Answer Yes to this prompt.
The contents of the file sys:system\hpnnw4.ncf (for NetWare
4.20 systems) or sys:system\hpnnw5.ncf (for NetWare 5.1
systems), which load the tcpip and spxs modules, as well as
the Controller Management Software modules, are then
appended to AUTOEXEC.NCF .
9
Press Esc to exit the installation.
10
To load the tcpip, spxs, and Controller Management Software
modules now without bringing down and restarting the server,
type one of the following two commands, depending on the
version of NetWare you are running:
a
For Netware 4.2 systems:
sys:system\hpnnw4.ncf
b
For NetWare 5.1 systems:
sys:system\hpnnw5.ncf
Note:
Before you attempt to manage the HP NetRAID-4M
controller remotely from a Windows system running FAST,
be sure that communication with the server via the network
is already established. (See the documentation provided
with your TCP/IP software for instructions on establishing
communications.)
Installing the Controller Management Software
5-5