Hewlett-Packard NetRAID-4M Controller Installation Guide
c
Change your working directory to /tmp, by entering the
following command:
cd /tmp
d
Untar the archive by entering the following command:
tar -xvf hpnapps.tar
e
Install the UNIX Controller Management Software on your
UnixWare system by entering the following command:
pkgadd -d /tmp -p hpnapps
f
Unmount the Navigator cdrom by entering the following
command:
umount /mnt/cdrom
4
Remove the Navigator cdrom from the cdrom drive.
Additional Operating Systems
If you are installing the Controller Management Software on an
operating system not listed in this chapter, please refer to the
software kit that shipped with your controller for instructions on
how to install the Controller Management Software.
5-10