Enabling Cluster Support - HP D7171A - NetServer - LPr Installation Manual

the operating system on the boot container to take advantage
of the redundancy and performance features of that container.
For more information see Appendix B, Using the BIOS
Container Configuration Utility.
Note:
If you wish to install the operating system on a
stand-alone disk instead of a boot container, you do
not need to use this utility.
®
SCSISelect — The SCSISelect Utility allows you to change
SCSI settings without opening the server chassis or handling
the card and to configure your HP NetRAID-4M. For more
information on using SCSISelect see Appendix A, Using the
BIOS SCSISelect and Disk Utilities.
Disk Utilities — The Disk Utilities allow you to low-level
format or verify the disk media of your SCSI hard disk drives.
For more information on using the Disk Utilities see
Appendix A, Using the BIOS SCSISelect and Disk Utilities.

Enabling Cluster Support

For instructions on how to enable cluster support, see Chapter 7,
Installing Clusters.
Installing the Hardware
2-17