Access - HP D7171A - NetServer - LPr Installation Manual

Note: In Windows NT, the HP NetRAID-4M remote agent
can be configured through a control panel application or
through the Windows NT Registry. Refer to the Flexible
Array Storage Tool User's Guide for more information.

Access

The access section determines how or if a remote user is allowed to
open a HP NetRAID-4M controller. The access section contains the
following flags:
Read-write — if this field is set to TRUE then remote read-
write access will be allowed. If this field is set to false then no
remote users will be allowed to open controllers in read-write
mode.
Remote-access — if this field is set to TRUE then remote access
will be allowed. If this field is set to FALSE then no remote
access will be allowed.
Note:
The read-write password setting and read-only-
password setting in hpnagent.ini are case sensitive.
Read-write-password — if this field is set to TRUE then users
opening controllers read-write remotely will be required to
provide a password to gain access to the controller. The user
will be prompted for a username and password. The user must
supply a username and a password for an account on the
NetWare server that has supervisor privileges. The setting is
case sensitive.
Read-only-password — if this field is set to TRUE then users
opening controllers read-only remotely will be required to
provide a password to gain access to the controller. The user
will be prompted for a username and password. The user must
supply a username and a password for an account on the
NetWare server that has supervisor privileges. The setting is
case sensitive.
Troubleshooting
C-5