HP D7171A - NetServer - LPr Installation Manual

Hp netserver lxe pro installation road map.
Hide thumbs
   
Installation Process Overview
Step 1: Start with this Installation Road Map
Complete all Road Map installation steps to correctly install your accessory boards, memory and mass storage. Verify that you have the latest
installation software by obtaining the HP NetServer Navigator CD-ROM Release History. Using the HP NetServer Navigator CD-ROM, you can
access the most current installation information from the Readme file and Information Assistant. The Readme File contains the latest solutions
to issues on the NetServer. Information Assistant contains a complete set of installation, management and service information that can be
easily searched and accessed on-line.
Step 2: Run Configuration Assistant
Configure your NetServer and install ISA boards using Configuration Assistant. Create a diskette with HP NOS drivers to be
installed with your Network Operating System (NOS) software. View the HP NOS installation instructions and copy the instructions
to a DOS-formatted diskette. Take the instructions to a printer and print them. After configuring your system, test your configuration
using Diagnostic Assistant. You should also create an EISA configuration utility diskette.
Step 3: Install your Network Operating System (NOS) and HP NOS Drivers
Install your NOS using the HP NOS Installation instructions that you have printed out from the diskette in Step 2. These
instructions tell you when to install the HP NOS drivers. You can also refer to the instructions included with your NOS.
Step 4: Install Management Utilities
Install the included server management software using the instructions in the
Guide
. Then install the software on the HP NetServer Navigator CD-ROM.
Step 5: Install UPS Software
Finally, install the Uninterruptible Power Supply (UPS) software using
HP NetServer LX Pro Series User Guide
the instructions in the
NOTE
Users of the HP LX array models should refer to the Disk Array
Controller manual packaged with their product.
Company
Hewlett-Packard
USA
Marketing
Hewlett-Packard
of
consent
written
another
to
translated
or
reproduced,
document
this
of
part
No
reserved.
protected
is
that
information
proprietary
by
furnished
not
is
that
equipment
or
use
the
for
responsibility
no
use
or
performance,
furnishing,
the
consequential
or
incidental
for
liable
be
not
shall
Hewlett-Packard
a
for
fitness
and
merchantability
the
to,
limited
not
but
including,
with
kind
any
of
warranty
change
to
subject
is
document
this
NetServer Assistant Installation
.
1996,
Copyright
©
95052-8059
CA
Clara,
Santa
Technical
58059,
Box
P.O.
Division
Server
Network
Company
Hewlett-Packard
Company.
prior
the
without
language
photocopied,
be
may
are
rights
All
copyright.
by
contains
document
This
Hewlett-Packard.
on
software
its
of
reliability
assumes
Hewlett-Packard
material.
this
of
with
connection
in
damages
for
or
herein
contained
errors
purpose.
particular
of
warranties
implied
material,
this
to
regard
no
makes
Hewlett-Packard
notice.
without
in
contained
information
The
Notice

Advertising

   Related Manuals for HP D7171A - NetServer - LPr

   Summary of Contents for HP D7171A - NetServer - LPr

  • Page 1

    Company Hewlett-Packard 1996, Copyright © 95052-8059 Clara, Santa Marketing Technical 58059, P.O. Division Server Network Company Hewlett-Packard Company. Hewlett-Packard consent written prior without language another translated reproduced, photocopied, document this part reserved. rights copyright. protected that information proprietary contains document This Hewlett-Packard.

  • Page 2

    Table of Contents Audience Assumptions This Road Map is for the person who installs, administers, and troubleshoots LAN servers. Hewlett-Packard Company assumes that you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy materials.

  • Page 3: Verify Contents, View The Readme File

    Verify Contents Unpack and verify the contents of the shipping box against the Contents Checklist included with your NetServer. If anything is missing or damaged, call your reseller. Obtain HP NetServer Navigator CD-ROM Release History To ensure that you have the latest version of the software, obtain the current Release History. This report describes m ajor software updates to each release of the HP Navigator CD-ROM and instructions for obtaining a current release.

  • Page 4: Remove The Cover, Install Additional Memory

    Remove the Cover If you are installing options, you must remove the cover. These tools are required for cover removal and installation of accessories: Front Panel Key Lock A flat 1/4 inch screwdriver and T15 TORX® driver An antistatic service kit (3M® 8501/8502/8503 or equivalent). This kit includes a static-dissipating work surface, a chassic clip lead, and a wrist strap.

  • Page 5: Install Additional Mass Storage Devices

    Install Additional PCI Boards and EISA Boards NOTE Do not install boards until instructed to do so by the Configuration Assistant program in Step 10 of this Road Map. Installation Instructions Memory Board 1. Read the documentation that is included with each board. Note any special instructions and refer to the Installation Recommendations.

  • Page 6: Troubleshooting

    Processor Cooling Duct Cover Product Reference Label: Replace All Covers and System Reliability Description Connect Cables Service Reference Label (beneath top cover) 1. Reassemble the HP NetServer. Verify that the Processor Cooling Duct Cover is properly closed. 2. Replace all covers. 3.

Comments to this Manuals

Symbols: 0
Latest comments: