Hp Netraid-4M Tools And Capabilities - HP D7171A - NetServer - LPr Installation Manual

locally manage an HP NetRAID-4M on systems running the
®
Microsoft Windows NT
It can also be used to remotely manage — from Windows
NT/Windows 2000 — Hewlett-Packard NetRAID-4M family
of products that are installed on another system running
Windows NT/Windows 2000 or NetWare. For more
information on FAST, see the Flexible Array Storage Tool User's
Guide.
Command Line Interface (CLI)— CLI lets you perform most
of the tasks that you can perform with the FAST utility and, in
addition, lets you perform some tasks not available in FAST.
CLI allows you to use CLI commands in command scripts. For
more information on CLI, see the Command Line Interface
Reference Guide.
BIOS Utilities— The built-in HP NetRAID-4M BIOS includes
the following utilities that allow you to configure and manage
your controller and attached storage devices:
– Container Configuration Utility (CCU)— Allows you to
create and manage containers.
– SCSISelect Utility (SSU)—Allows you to configure your
SCSI channel and devices.
– Disk Utilities (DU)—Allows you to format and verify your
attached storage devices.

HP NetRAID-4M Tools and Capabilities

The following table lists the capabilities of the BIOS, CLI, and
graphical user interface (GUI).
Tools and Capabilities
Create a raw (empty) disk
Create basic disk
Create dynamic disk
Write disk signatures
Write partition tables
Assign drive letters
Display drive letters
® ®
/Windows 2000 operating system.
BIOS CLI
1
Yes No
No Yes
No Not applicable
No Yes
No Yes
No Yes
No Yes
Introduction
GUI
Yes
Yes
No
No
No
No
Yes
1-3