Viewing Container Information; Initializing A Disk Drive - HP D7171A - NetServer - LPr Installation Manual

Hewlett-Packard NetRAID-4M Controller Installation Guide
Note:
You cannot use the CCU to manage containers on a
shared channel.

Viewing Container Information

Follow these instructions to view information on an existing
container:
1
At the BIOS prompt press Ctrl A.
2
Select Container Configuration Utility from the menu.
3
Select Manage Container from the CCU menu.
4
Select the container you wish to view information on from the
List of Containers dialog box and press Enter.
The Container Properties dialog box appears which shows
detailed information on the container. The physical disks
associated with the container will be displayed here.
Note:
To identify the physical disks associated with a
member of a RAID 0/1 container, highlight the
displayed member in the Container Properties dialog
box and press Enter.
5
Press Esc to return to the previous menu.

Initializing a Disk Drive

If an installed disk does not appear in the disk selection list for
creating a new container or if it appears grayed out, you may have
to initialize it before being able to use it as part of a container.
B-6