Additional Operating Systems - HP D7171A - NetServer - LPr Installation Manual

cp hpnraid.tar /tmp
d
Change your working directory to /tmp by entering the
following command:
cd /tmp
e
Untar the file hpnraid.tar by entering the following
command:
tar -xvf hpnraid.tar
f
Install the hpnraid driver by entering the following
command:
pkgadd -d /tmp hpnraid
g
When the installation completes, unmount the Navigator
cdrom by entering the following command:
umount /mnt/cdrom
h
Remove the Navigator cdrom from the cdrom drive.
i
Reboot your system to load the hpnraid driver.

Additional Operating Systems

If you are installing drivers on an operating system not listed in this
chapter, please refer to the driver kit that shipped with your
controller for instructions on how to perform the driver installation.
Installing the Device Drivers
4-27