Viewing Detailed Information About The Enabled Zone Configuration; Device Detail View Example - HP StorageWorks 2/16 - SAN Switch Manual

Advanced Web Tools user guide
In the Zone Admin module, all WWNs also display vendor names. In the member selection
lists in the Zone Admin module that display fabric and device information, you can right-click
port and device nodes to display which aliases the port or device is a member of. In addition,
you can right-click the device nodes and click View Device Detail to display the Device
Detail view, which launches a window displaying detailed information about the selected
device (see
Figure 28: Device Detail View Example
On original page 205, under the heading "About the File Menu," add the following row
to original Table 53, "File Menu Options":
View Effective Configuration
On original page 205, after the section "About the File Menu," add the following
section:

Viewing Detailed Information About the Enabled Zone Configuration

1. Access the Zone Administration window.
64
Figure 28).
The Zone Configuration in effect at the time you launched the Zone Admin module is
identified in the top right corner. This information is updated only when you manually
refresh the Zone Admin contents by clicking the Refresh icon at the bottom right corner
of the Zone Admin window, or when you enable a configuration through the Zone Admin
module. If someone changes the effective zone configuration (outside of your Zone
Admin session) after you have launched the Zone Admin module, but before you have
refreshed the Zone Admin module (by clicking the Refresh icon in the bottom right
corner), the effective configuration displayed in the upper right corner is not updated.
Select to view detailed information about the enabled zone
configuration.
Fabric OS 3.x Document Addendum