HP StorageWorks 2/16 - SAN Switch Manual page 216

Fabric OS reference guide
To use the current passwords option:
fcsprimary:admin> secModeEnable "--currentpwd --fcs *"
Your
installed on this equipment is subject to the End User License Agreement
provided
which you may review at http://www.switchkeyactivation.com/cps. By using
these security features, you are consenting to be bound by the
these
promptly contact the entity from which you obtained this software and do
not use these security features.
Do you agree to these terms?
This command requires Switch Certificate,
license to be installed on
PLEASE NOTE: On successful completion of this command, login sessions
may be closed and some switches may go through a reboot to form a secure
fabric.
Non-FCS admin password will be set the same as FCS admin password.
ARE YOU SURE
Please enter current admin account password:
Secure mode is enabled.
See Also
secfabricshow
secmodedisable
secmodeshow
secpolicyshow
216
use of the certificate-based
with the equipment and the Certification
documents. If you
(yes, y, no, n): [no] y
security features
do not agree to the terms of these documents,
(yes, y, no, n): [no] y
Security license and Zoning
every switch in the fabric.
of the software
Practices Statement,
terms of
Fabric OS 3.x Document Addendum