HP StorageWorks 2/16 - SAN Switch Manual page 230

Fabric OS reference guide
--change username
[-r rolename]
[-d description] [-e yes | no]
--recover
Examples
To add a new account:
switch:admin> userConfig "--add joe
Enter new password:
Re-type new password:
Account joe has been successfully added.
To display current account information:
switch:admin> userConfig "--show joe"
Account name: joe
Role: admin
Description: Joe Smith
Enabled: Yes
230
Changes attributes for an existing account,
named username, in the switch. The -r
option specifies a change to the
authorization rolename. The -d option
specifies a change to the description. The
-e option accepts either yes or no to enable
or disable an account. After an account is
disabled, the CLI sessions associated with
the account are terminated. The following
rules apply:
— An account cannot change the
rolename or description of
any default accounts.
— An account cannot change the
rolename or description for
accounts at the same or higher
authorization level.
— An account cannot change the
rolename of itself.
Except the default root account, no account
can disable itself.
Recovers all accounts from the backup
database. After accounts were recovered,
they are no longer present in the backup
database. The backup database is created in
Secure Fabric OS, when certain operations
cause a switch to delete some of its
customer-created accounts. For details, refer
to the secure mode description.
-r admin -d Joe Smith"
Fabric OS 3.x Document Addendum