HP StorageWorks 2/16 - SAN Switch Manual page 180

Fabric OS reference guide
The overall status can be in one of the following:
If the overall status is not healthy, the contributing factors are displayed also.
Operands
If no operands are specified, all ports are displayed. The following operands are supported:
--p portNumber
--s portState
Example
To display the port information for specified ports:
vxTarget:admin> fwportDetailShow
180
SFP Errors:
— STMSFP temperature is out of specification.
— SRXSFP receive power is out of specification.
— STXSFP transmit power is out of specification.
— SCUSFP current is out of specification.
— SVOSFP voltage is out of specification.
HealthyEvery contributor is healthy.
MarginalOne or more contributors are in this status.
DownOne or more contributors are in this status.
Yields a port detail report for a specific port.
Yields a port detail report for the specified portState.
Valid portState entries are:
Port Detail Report
Switch Name: vxTarget
IP address: 192.168.204.82
Port Exception report [by All]
--------Port-Errors-------- -----SFP-Errors----
Port# Type State Dur(H:M) LFA LSY LSI PER INW CRC PSC STM SRX STX SCU SV0
--------------------------------------------------------------------------------
000 U OFFLINE
001 U OFFLINE
002 U OFFLINE
003 U OFFLINE
004 LB HEALTHY
005 U OFFLINE
006 U OFFLINE
007 U OFFLINE
value = 0
— h: Report based on all healthy ports.
— m: Report based on all marginal ports.
— f: Report based on all faulty ports.
— o: Report based on all offline ports.
000:08 - - - -
000:08 - - - -
000:08 - - - -
000:08 - - - -
000:08 - - - -
000:08 - - - -
000:08 - - - -
000:08 - - - -
Report time: 07/23/2003 10:34:48 PM
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
Fabric OS 3.x Document Addendum
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -