HP StorageWorks 2/16 - SAN Switch Manual page 213

--quickmode
If a switch member is specified by domain or switch name, the switch must be in the fabric, or
the command fails.
If the FCS list of switches is not specified, the session becomes interactive and the user is
prompted to enter FCS members.
If the --currentpwd option is not used, the session becomes interactive and the user is
prompted to enter new passwords for root, factory, admin, user, and non-FCS admin accounts.
All operands must be specified within double quotes.
Fabric OS 3.x Document Addendum
Shorthand notation for a combination of the previous
options; for example, --currentpwd --lockdown
--fcs *. On successful execution of the command,
security is enabled in the fabric. All switches are FCS and
have passwords identical to that on the primary FCS, SCC,
and DCC policies, capturing the current state of the fabric.
This option can be used only on a fabric with secure mode
disabled and only when the command is run on the switch
specified as the primary FCS switch.
Fabric OS reference guide
213