Backing Up A Switch Config File; Performing A Config Download To A Switch; Configure (Upload/Download) Field Descriptions - HP StorageWorks 2/16 - SAN Switch Manual

Table 4: Configure (Upload/Download) Field Descriptions
Function radio buttons
Protocol
Host IP
File Name
User Name
Password
Config Upload
Progress
On original page 130, after the heading "Using the Configure Tab to Configure FAN
Frame Notification Parameters," add the following sections:

Backing Up a Switch Config File

To back up a firmware configuration file:
1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Switch Information tab.
4. Disable the switch.
5. Click the Apply button.
6. Select the Configure tab.
7. Select the Upload/Download subtab.
8. Select the Config Upload to Host radio button.
9. Enter the User Name, Password, and Host IP information.
10. Enter the name of the config file with a fully-qualified path.
11. Click Apply.

Performing a Config Download to a Switch

To download a configuration to the switch:
1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Switch Information tab.
4. Disable the switch.
5. Click the Apply button.
6. Select the Configure tab.
Fabric OS 3.x Document Addendum
Field
Radio buttons indicating the function to be performed: Config
Upload, Config Download, or Config Default.
The protocol to use for the upload or download: either FTP or RSH.
The host IP address.
The fully qualified path of the configuration file.
The user name for the host.
The password for the host.
A progress bar indicating the configuration upload or download
progress.
You can monitor the progress by observing the Upload/Download Progress bar on the
Configure tab.
Advanced Web Tools user guide
Description
"About the Switch Admin
"About the Switch Admin
Window.")
Window.")
43