HP StorageWorks 2/16 - SAN Switch Manual page 25

3. Select the Switch Events button from the Switch View.
4. Click Filter.
5. Click Level.
6. Select the event levels you want to display.
7. Click OK.
On original page 92, under the heading "Switch Admin Window Field Descriptions,"
modify original Table 17, "Switch Admin Window Field Descriptions," as follows.
Delete the following row:
Reset
In the last row (Status Icon) in the table, replace the following text:
With this text:
Fabric OS 3.x Document Addendum
A Switch Events Report appears.
The Event Filter dialog box opens.
The event severity level check boxes are enabled.
The filter is enabled and the enabled filter type is displayed in the Events Report.
Click this button to reset the field values to the last set of committed
changes. If the Apply button has not been pressed on this tab, the
parameters are returned to the original values the tab contained
when it was initially displayed.
A green square means the switch is enabled; a red square means the switch is disabled.
The icon means the switch is enabled, and the
Advanced Web Tools user guide
icon means the switch is disabled.
25