Viewing The Enabled Zone Configuration Name Without Launching The Zone Admin Module; Viewing Detailed Information About The Enabled Zone Configuration; Effective Configuration Window - HP StorageWorks 2/64 - Core Switch Administrator's Manual

Figure 29

Effective Configuration window

Viewing the enabled zone configuration name without launching the Zone Admin module

Select a switch from the Fabric Tree.
The selected switch appears in the Switch View. The current zone configuration name (if one is enabled)
is displayed in the lower portion of the Switch Information View. If no zone configuration is enabled, the
field displays none.

Viewing detailed information about the enabled zone configuration

1. Launch the Zone Admin module, as described on
The zone configuration in effect at the time you launched the Zone Admin module is identified in the
top right corner. This information is updated every 15 seconds. It is also updated if you manually
refresh the Zone Admin module contents by clicking the refresh icon at the bottom right corner of the
Zone Admin module, or when you enable a configuration through the Zone Admin module.
CAUTION: Clicking the refresh icon overwrites all local unsaved zoning changes. If anyone has made
any changes to the zones outside of your Zone Admin session, those changes are applied.
2. Use one of the following methods to identify the most recently effective zone configuration without
saving or applying any changes you have made in the Zone Admin module:
• Select File > View Effective Configuration in the Zone Admin module.
• Click the enabled configuration button
Both of these actions display the Effective Configuration window. If no zone is enabled, a message is
displayed, indicating that there is no active zoning configuration on the switch.
3. Optional: Click Print to print the enabled zone configuration details.
The print dialog box opens.
page 83.
in the Zone Admin module.
Fabric OS 5.x Advanced Web Tools administrator guide 95